Mechatronics Canada

June 27, 2022

 

MC New IO Module AXL P D162 from Phoenix Contact 1 400

Product Description

The module is an Axioline P I/O module for use in the Axioline P modular I/O system. It is used to acquire digital signals. The module is a modular I/O device that can be affixed to the Axioline P local bus, to communicate I/O data up to the Axioline P bus coupler, which forms the head of the station. The digital input module collects 24 V DC digital input signals and makes this information available to the bus coupler through the Axioline P local bus. The module is fully hot-swappable on the Axioline P local bus, which also provides power to the module.

Your advantages

  • •16 digital inputs according to EN 61131-2 type 1 and type 3

  • •24 V DC, 2.4 mA

  • •Connection of sensors in 2-conductor technology

  • •Can be used under extreme ambient conditions

  • •Temperature range: -40 °C ... +70 °C

  • •Hot-swappable

 

Axioline P, Digital input module, Digital inputs: 16, 24 V DC, connection technology: 2-conductor, 24 V DC input, degree of protection: IP20

 
 
Temporarily out of stock 
Expected to leave our warehouse in United States on Aug. 31, 2022, if ordered now
MC New IO Module AXL P D162 from Phoenix Contact 2 400jpg
 
 
 
To learn more, visit the Product Page by clicking here 
 
 

Latest Articles

  • Prev
  Derating is a protective measure which allows the use of power supplies at high ...
  The production of tires and the production of wafers seem to have absolutely nothing ...
  As machines become more connected, the need to service equipment remotely is ...
  Ask a Bishop-Wisecarver Engineer: How do I protect my linear guide wheel ...
  POSITAL has compiled some expert troubleshooting tips to get your encoder back up and ...
  The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario ...
  Corks are so light they float, but when shipped in bulk to wineries around the world, ...
  If a product is scratched by a robot but nobody was there to see it, how do you know ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...
  Limitations on the electrical power system make it important for the customer to ...

Featured Article: 

MC Four Ways Omrons New Factory Drive Recorder Helps You Determine Root Causes 1 400

If a product is scratched by a robot but nobody was there to see it, how do you know what exactly happened? Intermittent problems in manufacturing lines (such as die casting) can cause millions of lost $$$ when repair workers are forced to troubleshoot without any idea of what may have caused the problem or when the problem will occur again.

Omron’s Factory Drive Recorder addresses this issue by letting you monitor machines or areas within your facility and capture what happened just after or prior to a triggering event. Whether your application involves progressive die casting, machine tooling, bottle inspection, high-precision welding, or something else, this solution can save troubleshooting time.

Omron looks at four ways that automation engineers, quality control engineers, system designers, purchasers, and maintenance personnel can benefit from this technology.

 

Read More


 

Mechatronics Canada

Mechatronics Canada‘s editorial informs and engages a targeted audience of manufacturers, distributors, specifiers and end users delivering an editorial mix of the right content for the right audience.

Subscribe Here

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil