Mechatronics Canada

July 18, 2022

 

MC Four Ways Omrons New Factory Drive Recorder Helps You Determine Root Causes 1 400

If a product is scratched by a robot but nobody was there to see it, how do you know what exactly happened? Intermittent problems in manufacturing lines (such as die casting) can cause millions of lost $$$ when repair workers are forced to troubleshoot without any idea of what may have caused the problem or when the problem will occur again. Omron’s Factory Drive Recorder addresses this issue by letting you monitor machines or areas within your facility and capture what happened just after or prior to a triggering event. Whether your application involves progressive die casting, machine tooling, bottle inspection, high-precision welding, or something else, this solution can save troubleshooting time.

Let’s look at the four ways that automation engineers, quality control engineers, system designers, purchasers, and maintenance personnel can benefit from this technology.

1.  Recording the moment helps determine the exact root cause.

If you don’t have enough information to determine the root cause of an error, it’s extremely difficult to keep that error from occurring again (and again, and again). Fortunately, you can use the Factory Drive Recorder to save up to five minutes of video before and after a particular trigger that you specify beforehand.

By accessing prolonged video data, engineers can get to the root cause quicker and more efficiently. You can rewatch the video as many times as necessary to determine the fundamental problem rather than taking the entire machine apart.

2.  Omron’s offering is more affordable and less complex than other options.

Typical event capture software solutions on the market today are too expensive and quite challenging to set up. Experts and dedicated personnel are often required to maintain and run these systems.

Thanks to the simplicity of Omron’s industrial cameras, the Factory Drive Recorder system can be set up extremely quickly and with just a fraction of the cost of a traditional system. The recorder can use up to eight Omron cameras (U3V or GigE) on a single system with an easy-to-use interface.

3.  The system lets you specify the most relevant triggers for recording.

The Factory Driver Recorder Software offers four different trigger modes that you can as the cause of error:

  1. Time Trigger
  2. Motion Detection
  3. Master Image Comparison
  4. Trigger Signal (Hardware Trigger).

 

4. Additional Factory Drive Recorder information. 

The Omron Factory Drive Recorder offers users the ability to optimize their machine troubleshooting and minimize the time it takes to solve problems in the field through the combination of Omron Industrial Cameras and the easiest to use Event Capture Software on the market.

The Omron Factory Drive Recorder combines Omron’s incredibly robust and diverse Industrial Camera line with a brand new Event Capture Software to achieve an incredibly simple to use and feature rich solution for companies looking to monitor automation for error detection and provide an easier way to record and evaluate potential problems. Whether a company is looking to monitor for error detection or if you want to record specific periods of time based on external triggers, the Factory Drive Recorder is the perfect event capture software for the application.

 

To learn more about Omron’s Factory Drive Recorder, download their Product Brochure by clicking here or visit their Product Page by clicking here

Omron Logo 300x150

 

 

Source

 

Latest Articles

  • Prev
  Derating is a protective measure which allows the use of power supplies at high ...
  The production of tires and the production of wafers seem to have absolutely nothing ...
  As machines become more connected, the need to service equipment remotely is ...
  Ask a Bishop-Wisecarver Engineer: How do I protect my linear guide wheel ...
  POSITAL has compiled some expert troubleshooting tips to get your encoder back up and ...
  The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario ...
  Corks are so light they float, but when shipped in bulk to wineries around the world, ...
  If a product is scratched by a robot but nobody was there to see it, how do you know ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...
  Limitations on the electrical power system make it important for the customer to ...

Products

  • Prev
  ABB is expanding its FlexPicker® Delta robot portfolio with the IRB 365. With five ...
  The generic PITreader Keys are now available in six new colours. As a ...
  With ABB Access, you can unlock all aspects of your drives, motors, or PLCs, from one ...
  Less than an hour away from the Detroit-Windsor border in Canada lies Orora Fresh, a ...
  Endress+Hauser announces a new version of its J22 TDLAS gas analyzer, an update to ...
    AutomationDirect has added new pressure sensing accessories from Winters. ...
  Kit (or modular) encoders are designed to be integrated into electric motors or other ...
  Advanced Motion & Controls Ltd. supplies automation solutions by Epson ...
  HyperCyl industrial products are available in Canada through Advanced Motion ...
  The new analysis unit PSEN rd1.x I/O with USB connection is available now for safe ...

Featured Product: 


MC Rittal AX Fiberglass Enclosures Added Durability with Non Metallic WM Enclosures 1 725

 

AX Fibreglass Wallmount Enclosures available now 

Rittal has rounded off its AX range of compact enclosures with its newly developed fibreglass enclosures. The manufacturer now offers the best of two worlds: the advantages of sophisticated technology combined with the benefits of an extremely robust material.

The AX fibreglass enclosure protects the electrical components even in very harsh environments. Its new mounting functions make rapid expansion possible and provide a greater scope for installation using smart technology.

What the new AX Fibreglass Enclosures provide:

  • •Sophisticated technology
  • •Robust material
  • •Simple, fast configuration
  • •High safety standards

 

For more information, click here

 

 

 

Mechatronics Canada

Mechatronics Canada‘s editorial informs and engages a targeted audience of manufacturers, distributors, specifiers and end users delivering an editorial mix of the right content for the right audience.

Subscribe Here

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil