Mechatronics Canada

PB-50-Festo-HealthcareRobotics-400.jpg

October 27, 2021

The first four companies in the inaugural Healthcare Robotics Startup Catalyst program have been selected by Festo and MassRobotics. The Healthcare Robotics Startup Catalyst is a new program for the global robotics startup community to advance healthcare developments by providing promising companies with investor and customer introductions, access to subject-matter experts, and a range of technical and marketing support resources.

The robotics companies selected include Assistive Technology, an American startup dedicated to at-home physical therapy solutions that are operable at a low cost and always accessible to rural patients and those who need closer monitoring for recovery. Swiss firm Bionomous provides laboratory equipment to automate the screening, sorting, and pipetting of miniature biological entities for more ethical and faster research in life science. Eureka Robotics, Singapore-based, develops and commercializes cutting-edge robotics and artificial intelligence (AI) technologies to automate high-accuracy, high-agility tasks. Finally, Canada’s Kinarm uses robotic arms to provide an objective assessment method to identify, measure, and track cognitive, motor, or sensory impairments resulting from injury or disease. These four startups will have access to the innovation centers and engineering teams of Festo, one of the world’s leading automation companies, and collaborating corporate partners.

With the onset of the pandemic, the lack of awareness between the healthcare and technology communities was evident in terms of how robotics could be applied to ease staffing concerns and reduce the potential spread of the virus. Many unmet and untapped white spaces were identified, which initiated the development of a MassRobotics Healthcare Robotics Working Group and the Catalyst Program. 

“To fill these spaces, we encouraged healthcare robotics startups in the following areas to apply to the catalyst program – clinical care, public safety, laboratory and supply chain automation, out-of-hospital care, quality of life, continuity of work and education, and healthcare professional training and support,” said Fady Saad, MassRobotics Co-founder and Vice President of Strategic Partnerships. “The response and quality of the companies were overwhelming. We believe this inaugural group represents an excellent cross-section of the many initiatives in healthcare robotics.”

“Our mission is to ultimately improve patient outcomes and the quality of healthcare with transformative innovations brought to market by startups through the catalyst program,” said Nuzha Yakoob, Head of Technology & Innovation North America, Festo Corporation.

The inaugural catalyst program runs from now through March 2022. For additional information visit the Healthcare Robotics Startup Catalyst program webpage.

Latest Articles

  • Prev
  Derating is a protective measure which allows the use of power supplies at high ...
  The production of tires and the production of wafers seem to have absolutely nothing ...
  As machines become more connected, the need to service equipment remotely is ...
  Ask a Bishop-Wisecarver Engineer: How do I protect my linear guide wheel ...
  POSITAL has compiled some expert troubleshooting tips to get your encoder back up and ...
  The introduction to SEW Eurodrive’s Innovation Lab was a big success. With Ontario ...
  Corks are so light they float, but when shipped in bulk to wineries around the world, ...
  If a product is scratched by a robot but nobody was there to see it, how do you know ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...
  Limitations on the electrical power system make it important for the customer to ...

Products

  • Prev
  ABB is expanding its FlexPicker® Delta robot portfolio with the IRB 365. With five ...
  The generic PITreader Keys are now available in six new colours. As a ...
  With ABB Access, you can unlock all aspects of your drives, motors, or PLCs, from one ...
  Less than an hour away from the Detroit-Windsor border in Canada lies Orora Fresh, a ...
  Endress+Hauser announces a new version of its J22 TDLAS gas analyzer, an update to ...
    AutomationDirect has added new pressure sensing accessories from Winters. ...
  Kit (or modular) encoders are designed to be integrated into electric motors or other ...
  Advanced Motion & Controls Ltd. supplies automation solutions by Epson ...
  HyperCyl industrial products are available in Canada through Advanced Motion ...
  The new analysis unit PSEN rd1.x I/O with USB connection is available now for safe ...

Featured Product: 


MC Rittal AX Fiberglass Enclosures Added Durability with Non Metallic WM Enclosures 1 725

 

AX Fibreglass Wallmount Enclosures available now 

Rittal has rounded off its AX range of compact enclosures with its newly developed fibreglass enclosures. The manufacturer now offers the best of two worlds: the advantages of sophisticated technology combined with the benefits of an extremely robust material.

The AX fibreglass enclosure protects the electrical components even in very harsh environments. Its new mounting functions make rapid expansion possible and provide a greater scope for installation using smart technology.

What the new AX Fibreglass Enclosures provide:

  • •Sophisticated technology
  • •Robust material
  • •Simple, fast configuration
  • •High safety standards

 

For more information, click here

 

 

 

Mechatronics Canada

Mechatronics Canada‘s editorial informs and engages a targeted audience of manufacturers, distributors, specifiers and end users delivering an editorial mix of the right content for the right audience.

Subscribe Here

Kerrwil Publications

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil