|

Humber Students Take Home Gold at Skills Ontario Competition in Mechatronics

Humber students move on to Skills Canada National Competition being held May 25 and 26 in Manitoba

May 23, 2023

Humber Students Take Home Gold at Skills Ontario Competition in Mechatronics
Paxton C. (left) and Dillon K. (right) win gold at 2023 Skills Ontario Competition in Mechatronics (Team of 2), which was held May 1 to 3 at the Toronto Congress Centre

By Krystie Johnston

Skills Ontario recently held the 2023 Skills Ontario Competition in person at the Toronto Congress Centre. It was the first in-person event after three years of it being held virtually during the COVID pandemic.

To compete in the Skills Ontario Competition, students must register through their institution. Some institutions host their own internal competition to determine who will be selected to represent them. In the Mechatronics Contest, for example, students from Humber College compete against each other to determine who advances on to the Provincial Competition. The Competition advances next to a National Competition, and finally a World Competition.

In February, Humber College hosted their Humber Skills Varsity Qualifying Competition in Mechatronics. Humber students have dominated the Provincial, National, and World level competitions for nearly 20 years, winning 45 medals since 2004. The competition is sponsored by industry partners such as Magna and SEW-Eurodrive. Seven teams of students demonstrated their skills in automation, mechanical building, electrical wiring, troubleshooting, speed execution, and professional practice. Each team demonstrated confidence and cooperation; however, only one team took Gold and went on to compete at the Provincials.

Paxton C. and Dillon K. won gold and advanced to compete in Toronto against the best-of-the-best from the province in the Mechatronics Contest. On May 3, 2023, at the Awards Ceremony, they were again awarded a gold medal in the Mechatronics Contest and will be moving on to Skills Canada National Competition being held May 25 and 26 at the RBC Convention Centre in Winnipeg, MB. Competitors from Centennial College and Conestoga College won Silver and Bronze, respectively. The fourth-place winners in the Mechatronics Competition are also Humber College students, Sara H and Jonathan W.

Overall, across all contests, it was a successful showing for Humber College students at the Skills Ontario Competition. Humber sent almost 40 students to the competition, in total, they won four gold medals, two silver and three bronze.

Humber Students Take Home Gold at Skills Ontario Competition in Mechatronics
Humber sent almost 40 students to the competition, in total, they won four gold medals, two silver and three bronze. Paxton C. (third from left), and Dillon K. (fourth from left), among Humber students who won medals in their contests as well

Dillon K. has won Gold at the Humber Skills Varsity Qualifying Competition in Mechatronics before – and Silver at the Skills Ontario Competition – but this was the first time he won Gold at the provincial level. Dillon K. says, “Winning Skills Ontario was much more exciting because it was the first win among teams we have never met. Unlike the Humber internal competition, we knew nothing about our competitors. Representing Team Ontario in Winnipeg is a wonderful honor because now we are representing our province – not just our school.”

Dillon K., Second Year Student, Electromechanical Program at Humber College

Paxton C. is glad that their hard work has taken them so far already and looks forward to the opportunity to represent Team Ontario as well. He says, “It feels great to make it to nationals and represent Ontario on the national stage. It is really satisfying having all the work we have put in come to fruition. I think that with the amount of time we have devoted to the competition, it is deserved, and I look forward to competing in nationals.”

Paxton C., First Year Student, Electromechanical Program at Humber College

Later this month, at the Skills Canada National Competition, Dillon K. and Paxton C. will be competing against teams that are new to them as well. And the countdown is on! Competitors have roughly three weeks to prepare for the next level of competition and are busy practicing their skills.

This year, Skills Canada National Competition is bringing three new initiatives to look forward to: First, they will be hosting a NEW! Skills Symposium where industry, government, and education will have the opportunity to meet, exchange, and share knowledge. This year’s theme is Embracing Adaptability: Navigating Change in the Skilled Trades and Technologies. Second, they will be hosting a NEW! Skills Showcase featuring First Nations, Inuit and Metis Skills. And finally, they will present the NEW! Empowering Women in Trades initiative that will bring together industry partners to show young women the incredible careers that are available in the skilled trades.

The Skills Competitions are an ideal way for tomorrow’s workforce to discover new and exciting careers. The Skills Canada National Competition is the only national, multi-trade and technology competition for students and apprentices in the country. Each year, more than 550 competitors from all regions of Canada participate in over 40 skilled trade and technology competitions.

Dillon K. and Paxton C. sum up their thoughts on the skilled trades and the Skills Competitions:

“Skills Competitions allow students in the trades to show off their specialized skills to other like-minded individuals. Much like competing in organized sports.”

Dillon K., Second Year Student, Electromechanical Program at Humber College

“I would encourage other students to really apply themselves to what they enjoy.” Paxton C.

Paxton C., First Year Student, Electromechanical Program at Humber College

Best of luck at the National Competition!

More Information

Skills Ontario Competition 2023

Skills Canada National Competition 2023

Related Story

Humber Students Win Intra-Provincial Mechatronics Skills Competition

On February 17, students competed at the Humber Skills Varsity Qualifying Competition in the Mechatronics category at the Skills Mechatronics Room, located on the second floor of the Barrett Centre for Technology Innovation. The event lasted most of the day, with organizers and competitors arriving before the event kicked off around 9:00am and wrapped up early evening as teams finished their work and were judged.

Related Articles


Latest Articles

  • How the NX102 Controller Streamlines Machine Automation with EtherCAT and CIP Safety

    November 12, 2024 In today’s manufacturing landscape, the complexity of machine control systems often leads to increased costs, extended implementation times, and challenging maintenance requirements. Omron’s NX102 Machine Automation Controller addresses these challenges head-on by seamlessly integrating EtherCAT motion control and CIP Safety functionality into a single, powerful platform. Simplified Network Architecture Through Integration The NX102 controller… Read More…

  • 3 Things Manufacturers Should Know About Industry 5.0

    November 12, 2024 While many manufacturers are still embracing the principles of Industry 4.0, the next evolution, Industry 5.0, is already beginning to take shape. Unlike Industry 4.0, which was a giant leap forward in automation and digitalization, Industry 5.0 represents a reconsideration of how smart technology platforms can work alongside humans. This includes technologies like artificial intelligence (AI), the Industrial… Read More…


Featured Article

Revolutionizing Material Movement with Autonomous Mobile Robots

Revolutionizing Material Movement with Autonomous Mobile Robots

In today’s fast-paced manufacturing and logistics industries, the need for efficient and flexible material movement solutions has never been greater. Traditional methods like conveyor systems, forklifts, and manual pushcarts have served us well, but they come with limitations.

That’s why Omron is thrilled to announce the launch of their game-changing MD Series of Autonomous Mobile Robots (AMRs). Read more


Products

  • AM8300 Servomotors Set New High-Water Mark for Performance

    November 15, 2024 For applications requiring especially high speeds and dynamics, Beckhoff offers the water-cooled AM8300 servo series with standstill torques three times greater than conventional options With the AM8300 servomotor series, Beckhoff expands its drive technology portfolio to include modular motors with integrated water cooling. Compared to conventional convection-cooled motors, these devices support higher… Read More…

  • Got to Have a WAGO” – 50 Years of Splicing Connector

    November 14, 2024 Small product, big impact: Five decades ago, the company revolutionized connection technology in electrical installation with the splicing connector. The phrase “Got to have a WAGO” has been firmly anchored in the vocabulary of every professional electrician since its launch in 1974. Even today, “WAGO” stands for speed, safety and maintenance-free operation… Read More…