February 1, 2023 Carlo Gavazzi is excited to introduce the new SPDE Power Supply Series, ultra-compact single-phase DIN-rail power supplies designed for electrical panels. The SPDE Series consists of three frame sizes, starting from 75 W with 32 mm width, through a 480 W with 48 mm width. Their ultra-compact housing design allows them to save up to…
Capacitor Contactor Option Available For HPS Centurion P Passive Harmonic Filter January 25, 2023 The capacitor contactor option allows the user to open and close a contact, removing the capacitors from the circuit. The user can control the contactor by providing configurable contact output from the VFD which opens at light load. Passive Harmonic Filter…
Branson GMX-HP delivers higher power with greater downforce to meet changing requirements of global electric vehicle manufacturers January 24, 2023 Emerson’s new Branson™ GMX-HP ultrasonic metal welder combines greater power and downforce, essential for larger welds required by electric vehicles, batteries and energy storage systems, with a modular equipment design and features that simplify installation…
Omron’s New G2RV-ST And G3RV-ST Relays Are Among the Fastest in the Industry That Provide Better Visibility, Top-Notch Reliability, and Vibration Resistance January 23, 2023 Speedier relays are a key requirement in today’s fast-paced manufacturing industry, and Omron responded to this need with the new ST relays that are among the fastest available on the…
The product family PIANO from PULS stands for cost-efficient, basic DIN rail power supplies from 36-480W with high efficiency, long lifetime and compact size. PULS PIANO products help you achieve more with less January 6, 2023 36W to 90W 1-phase power supplies. Models PIM36, PIM60, and PIM90 120W to 480W 1-phase power supplies. Models PIC120,…
The new iTEMP TMT31 temperature transmitter for analog 4-20mA signals is designed by Endress+Hauser to deliver great long-term stability, high accuracy and ease of use. In order to minimize the effort involved in commissioning, device configuration and maintenance, this RTD head transmitter for Pt100/Pt1000 sensors can be ordered pre-configured or parameterized on site from a laptop or tablet using free operating software DeviceCare from Endress+Hauser.
Recently, the official launch of the Smartflower Microgrid (MG) marked another milestone for the future of green technology in Saskatchewan. The Saskatoon Industry Education Council (SIEC) and Siemens Canada welcomed dignitaries and guests to a launch event at Bishop James Mahoney High School in Saskatoon. The Smartflower MG is now powering classrooms and providing real-time data on electricity production and energy absorption.
Augmenta made headlines recently with an announcement that they have raised US $4.1 million in seed funding to automate building design for the construction industry. Their platform, the Augmenta Construction Platform (ACP), enables contractors and engineers to design fully detailed, code-complaint and constructible designs in hours rather than weeks or months. Mechatronics Canada had an opportunity to speak with Francesco Iorio, CEO and co-founder of Augmenta.
The DriveRadar® IoT suite package includes plug and play smart sensors, Edge processing, and intelligent data analysis to transform your static Gear units into sophisticated, self-learning, and self-diagnosing Gear Units. The technology is designed to take the guesswork and even some of the thinking out of your maintenance tasks and allows you to view critical performance data right from your smart device. Plan maintenance and repair activities predictively for your drives and avoid undesirable system failures.
The Customer Experience Centre. Four thousand four hundred square meters of sensationally detailed architecture, designed to ensure a superior customer and employee experience. The CEC showcases Endress+Hauser’s best-in-class instrumentation. It has a full-service calibration laboratory capable of handling the entire spectrum of flow, temperature, pressure, and level instrumentation – unmatched by any in the country. The crowning jewel is the state-of-the-art Process Training Unit (PTU), which features on-line instrumentation and controls where people can get hands-on experience with operation, diagnostics, and troubleshooting found in real-life process plants.
Mechatronics Canada had the opportunity to sit down with Dr. Zoe Reeve, Analytic Product Manager at Endress+Hauser Canada. In this interview she discusses her journey to Endress+Hauser Canada and sheds light on what an Analytic Product Manager does. She also touches on some of the initiatives that have been taken to help women and employees in general achieve professional heights.
The process sector’s embrace of process automation is creating more opportunities for reaping the significant benefits of ultrasonic flow measurement with clamp-on sensors. Endress+Hauser developed the Proline Prosonic Flow W 400 clamp-on flowmeter with the most compelling case yet for applying this safe and easy to install measurement system in basic and standard applications. The Prosonic Flow W 400 combines this proven liquid measurement technology with the unique advantages of Endress+Hauser’s Proline device lineup to satisfy multiple user needs, including long-term cost efficiency, comprehensive process monitoring and maximum freedom in planning measuring points.
Littelfuse, Inc., an industrial technology manufacturing company empowering a sustainable, connected, and safer world, announced it will begin distributing its manufactured fuse, fuse holder and fuse block products directly from its Canadian warehouse.
The Mach 3 is designed for digitally sensitive applications and comes with added feature ‘Active SineWave Tracking’. It is used on MRI’s, dentist offices, large LED Jumbotrons, computer rooms and truck scales.